Lupus 1 Kanal PoE Injector
Item num.: 10808
EAN: 4260195431799
1 Channel Power over Ethernet injector
POE-1HP is a low cost
1-Port High Power midspan injector. It is
functionally compliant to the IEEE802.3af
standards. Cat6 cables into 10/100/1000 Base
T systems, eliminating the need for
power management and prioritization.
APPLICATIONS |
|
Security Camera with Pan/ Tilt/ Zoom | IP Print Servers |
FEATURES |
|
Fully Compliant with IEEE802.3af | 10/100/1000 base T compatible; Full ProtectionOCP, OVP |
Full Power of 15.4W per port | Cisco AP1250 Full Power Support; rack mount possible |
Cisco: no extern parts required for Legacy devices: | VoIP Phones (7910, 7912, 7940, 7960) Access points (350, 1100, 1200) |
SAFETY |
|
Isolation Test | Primary to Secondary: 4242VDC for 1min. 10mA, Primary to F.G.: 2121VDC for 1 minute, Output to F.G.: 2121VDC for 1 minute |
Insulation Resistance | Primary to secondary: >10M OHM 500 VDC, Primary to F.G.: >10M OHM 500 VDC |
OUTPUT |
|
DC Output | 56V @ 15.4W per port |
Regulation | Functional requirements of IEEE802.3af |
INPUT |
|
AC Input Voltage Range | 90 to 264 VAC |
Leakage Current | 3.5 mA max @ 254 VAC 60 Hz |
AC Input Frequency | 47-63 Hz |
AC Inrush Current | 30A(RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC |
AC Input Current | 2.5A for 90VAC / 1.3A for 240VAC |
GENERAL |
|
Effi ciency | 75% (typical) at max. load and 120VAC 60Hz |
Hold-up Time | 16mS min. 120VAC and max. load |
Transient O/P Voltage Protection | 60V max. at switch on and off at any AC line Phase |
Turn-On Delay Time | 3 sec max. at max. load, and 120VAC 60Hz, 25Hz |
Regulation | Functional requirements of IEEE802.3af |
EMC |
|
Conducted & radiated Emission | EN55022 Class A, FCC Class A with UTP Cabling EN55022 Class B, FCC Class B with FTP Cabling |
Immunity EN50082-1 | ESD EN61000-4-2. Level 3 RS EN61000-4-3. Level 2 EFT EN61000-4-4. Level 2 Surge EN61000-4-5. Level 3 CS EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Harmonic EN61000-3-2 Class A |
ENVIRONMENTAL |
|
Temperature | Operation 0 to +40°C, Non-operation -25 to +65°C |
Humidity | Operation 5 to 90% |
Add new comment
Please do not hesitate to contact us in case of any questions. We will respond as soon as we can.